PH: 630.860.1150

FAX: 630.860.1150

Engineering Tools:
chem_resist
Corporate Office:
M-Cor, Inc.
PO Box 844
Wood Dale, Il 60191
 
Manufacturing Plant:
M-Cor Inc.
3405 Byron Rd.
Helena,MT. USA
 
Tel: 630-860-1150
Fax: 630-860-0522
email:
customerservice@m-cor.com

Bibliography
Disclaimer/Warranty

Encapsulated O-Rings | Structure | Chem Resistance | Groove Design | Installation | Dimensions | Tolerances | Misc Info | Material Data
mcorlogo121704-[Converted] Encapsulated o-rings
Teflon Encapsulated O-rings

manufacturers of high performance encapsulated o-rings and elastomer products since 1987

Encapsulated O-Rings For Extreme Applications

Buy Quality American Made Encapsulated O-Rings and Viton® Extrusions

Encapsulated O-ring manufacturer and Precision extruder M-Cor Inc. is a leading U.S. producer of high performance sealing products for extreme environments. Extruded profiles are converted into o-rings, Teflon® encapsulated o-rings, camlock gaskets, chemical transport tubing and various other sealing products. With in house tooling capabilities, we are able to immediately respond to customer prototype and production request. Call 630.860.1150 or Email now for immediate assistance.

Engineering: Section 1: Structure: Teflon® encapsulated O-ring
contact-phone10 engineer_contact07 contact-email05

ENCAP-O-SEALTM TEFLON® ENCAPSULATED O-RINGS
Teflon® FEP (operating temp 400F) or PFA (operating temp 500F) seamless encapsulated silicone and Viton® O-rings.

STRUCTUREEncapsulated O-ring
ENCAP-O-SEALTM Teflon® encapsulated O-ring, is an O-ring consisting of a seamless and uniform FEP/PFA encapsulation which completely encloses a core material of either silicone FDA compliant, (FPLTRD70-10 exceeds former ZZR765A-B) or Viton® (A500/A401C) elastomers. The dimensions of the ENCAP-O-SEALTM Teflon® encapsulated O-ring are characterized by the inside diameter and the cross section (I.D. x C.S.).

FUNCTION
The seamless, uniform and integral FEP/PFA encapsulation of the ENCAP-O-SEALTM Teflon® encapsulated O-ring is responsible for the sealing effect, whereas the continuous reset and the constant pressure of the encapsulation onto the sealing point is accomplished by the elastomer core. The result is an overall sealing compression, increasing with medium pressure. The ENCAP-O-SEALTM Teflon® encapsulated O-ring behaves like a highly viscous fluid, any pressure exerted on the seal is transmitted practically undiminished in all directions.

PROPERTIES
1) High chemical resistance due to the FEP/PFA encapsulation.
2) Continuous service temperature: FEP 400F/204C, PFA 500F/360C
3) Anti-adhesive properties / non-stick surface.
4) Sterilizable-F.D.A. and USP Class VI compliant. See General Specifications.
5) Low vapor permeability and minimal water absorption.
6) Low compression set.
  • ENCAP-O-SEALTM Teflon® encapsulated O-rings are resistant to practically all chemicals due to the FEP/PFA encapsulation. The FEP/PFA encapsulation is integral and has no weak points such as obvious seams or overlaps.
  • 98% of all technical applications are within the operating temperature range of the ENCAP-O-SEALTM Teflon® encapsulated O-ring.
  • The FEP/PFA encapsulation of the ENCAP-O-SEALTM Teflon® encapsulated O-ring has a very low coefficient of friction.
  • The elastomer core of the ENCAP-O-SEALTM Teflon® encapsulated O-ring ensures a continuous intensive contact with the sealing surfaces. Combining the best qualities of FEP/PFA resins and silicone or Viton® elastomers the ENCAP-O-SEALTM Teflon® encapsulated O-ring is an inexpensive, efficient and economical solution to many critical sealing problems.
    		•

    Some Restrictions Apply

    Encapsulated O-Rings | Structure | Chem Resistance | Groove Design | Installation | Dimensions | Tolerances | Misc Info | Material Data

    Teflon® Encapsulated Cam Lock Gaskets

    Viton® Extreme Extrusions

    Encapsulated O-Rings
    VITON_GEN_SMALL

    Licensee

    Viton® Vulcanized and Molded O-Rings

    Viton® Precision Extrusions

    Viton® is a registered trademark of DuPont Performance Elastomers LLC

    Teflon® is a registered trademark of DuPont Co.

    Offices: M-Cor Inc. POB 844 WoodDale Il. U.S.A. 60191

    Plant: M-Cor Inc | 3405 Byron Rd. | Helena, MT.U.S.A | 59602

    Teflon Encapsulated O-rings

    Phone: (630) 860-1150 Fax: (630) 860-0522
    Content © 2001-2008 M-Cor Incorporated.